App setup instructions
Go to the Google Play or App store and download the MorningRod app.
App Store (Not yet available)
First, we need to reset the wifi configuration that is stored on the device.
To reset the WiFi configuration, use something small (such as the tip of a pen) to press and hold the bottom button for 12 seconds.
Next, open up the app and create an account.
Once created, log in.
If this is your first time setting up a device, this main screen will be empty. In this picture, there are already 3 devices set up.
Click the 3 lines in the upper right corner.
Click on "Add new device"
Choose a WiFi network ( Do NOT use a 5Ghz network), enter your password, and "Continue"
You will see this screen. If your device has an LED on it, it should be flashing blue.
Pick the device, it will be named MorningRod or Elektra.
If you do not see it, reset the device by pressing the button on top of the motor housing. Wait 20 seconds.
Then reset the wifi configuration by pressing and holding the bottom button for 20 seconds.
It will now take a minute to connect.
Once connected, give it a unique name.
It should now appear on your main screen.
You should now see your device on the main screen.
Now we need to tune the motors so they open and close properly.